8-049N-07 Product Guide

Telephone Order Line

Product Range

Lashings, Straps, Tie-Downs, Load Restraint Systems

Hoist Equipment Lifting Clamps & Magnets Lifting Slings Load Indicators Multi-Leg Textile Slings Shackles & Eyebolts System 8 Chains

Barrel Hook Blue Web Sleeving Chain Sling Tabs Clevis 'C' Hook Clevis Clutch Clevis Grab Hook Clevis Self Locking Hook Clevis Shackle Clevis Sling Hook Closed Coupling Master Link Component Connector Coupling Pin & Sleeve Set Coupling Self Locking Hook Coupling Sling Hook Eye Container Hook Eye Foundry Hook Eye Grab Hook Eye Self Locking Hook Eye Sling Hook Grade 'T' (8) Chain Half Coupling Link High Security Locks Insulated Blank Swivels with ball bearing Latch Kits to suit Sling Hooks Latch Kits to suit Weld on Hooks Load Pin Kits Master Link Open Coupling Master Link Reevable Egg Link Round Sling Coupling Security Chains Shortening Clutch Shortening Clutch Loading Pin Kit Skip Hook Skip Hook Latch Sub Assemblies Swivel Self Locking Hook ball bearing Swivel Self Locking Hook brass bushing Swivel Sling Hook ball bearing

8-049N-07

Swivel Sling Hook brass bushing Tie Tag Trigger Kits to suit Self Locking Hooks Weld On Hook Weld On Lifting Point

Wire Rope Slings

Materials Handling

Height Safety - Fall Arrest Equipment

Protection & Packaging

8-049N-078-049N-07Variations of this product are available. Please select 'Add to Enquiry' from the table below.Quick OverviewSwivel Sling Hook ball bearing

Tensys (R) T(8) Alloy Steel Chain is manufactured specifically for use in chain slings for lifting purposes. The chain is heat treated for tensile strength and resistance to wear whilst also allowing for shock absorption.

Product DescriptionWorking Load Limit (WLL) is the maximum load which chain or components are designed to sustain in lifting use. The mean stress at this load is 200N/mm2 (MPa) and is based on a factor of safety of 4:1

Manufacturing Proof Force (MPF) is the force to which during manufacture chain or components are subjected. The mean stress at this load is 500N/mm2 (MPa) which is 2.5 times the working load limit.

Minimum Breaking Load (MBL) is the minimum force which chain or components must withstand before failure. The mean stress at this load is 800N/mm2 (MPa). The minimum elongation before failure is 20%.Product Variations

Part Code
8‑049N‑07
8‑049N‑10
8‑049N‑13
8‑049N‑16
8‑049N‑20

WLL (Tonnes)	Chain (mm)	Dim. A	Dim. B	Dim. C	Dim. D	Dim. E	Dim. F	Dim. G	Mass (Kg)
2.0	7/8	155	26	27	36	12	18	22	0.9
3.15	10	189	36	37	42	16	23	29	1.5
5.3	13	233	42	40	48	20	28	35	3.0
8.0	16	280	50	55	60	22	35	44	5.0
12.5	20	356	56	82	74	25	49	65	9.3

Scroll to View Additional Product Information